EBL 16 Bay AA AAA Battery Charger with Smart LED Light and High Speed Charging for AA AAA Rechargeable NiMH Batteries, 2 USB Port
⚡16 Slots Battery Charger⚡
Unique Round Design
Designed with 16 individual slots, the EBL FY-1602 battery charger can charge 1-16 AA AAA rechargeable Ni-Mh Ni-Cd batteries, with a clear LED indicator for each slot, easy to know the charging status of the batteries.
【Efficient Cooling system】
The battery charger is a special hollow-carved design, more efficient for heat dissipation and cooling down performance, preventing the batteries from overheating, which can better protect the battery and devices for you during the whole charging process.
【Stable and reliable】
With an advanced MCU control system, intelligent △V, and -△V cut-off charging technology, the battery charger will automatically recognize the power and turn to trickle charging to prevent over-heat, over-voltage, and over-current.
【Build in Dual-Port USB】
With the upgraded design, equipped with 2 USB ports, the battery charger not only can simultaneously charge 5V USB enable devices like phones, tablets, cameras, and so on but also charge rechargeable batteries at the same time.
Multi-Protection More Secure
Adopt advanced MCU control and function, providing constant current & constant voltage safety model.
Over-charge Protection，Over-current Protection，Overy-voltage Protection，Over-heat Protection，Short-Circuit Protection
【 What You Get 】
1 x Smart Battery Charger
1 x User manual
1 x AC Plug
【 Strengths 】
⚡Independent 16 Slots
⚡Intelligent Auto-detection Technology
⚡Safe and easy to use
⚡Professional technical, high quality
Product Type: Independent 16 Slots Battery Charger AA/AAA
Input voltage: AC 100-240V 50/60Hz
Output: AA/AAA 320mA±20%
Battery charging rate: ≧90%
USB port output: 5V 1A; 5V 2.1A
Working temperature: 0-35℃
The surface temperature of the charger: 35℃ to 55℃
Compatible: EBL FY-1602 can charge 1/2/3.../15/16 pieces of AA AAA Ni-MH Ni-Cd rechargeable batteries freely
Full load power consumption: 24W MAX
Low voltage 100V overcurrent protection: 2.5-2.9A; high voltage 240V overvoltage protection 2.3-2.6A
Charging instructions: Power on the green and red lights each flash off after one time; when charging: the red light is always on; when it is full: the green light is always on
Charging current: AA/AAA: 320+20%
Charging time: The program can set the maximum off time of 12 hours at a fixed time
【Attention】1. For a better charging rate, please make sure the occupation of slots is less than 8 when you charge a table or two phones.
2. Never mix charge different type and different capacities of batteries under the same LED indicator.
3. Using environment: 0℃ to 35℃, it is a normal phenomenon that the battery is warmer than room temperature when charging.
4. Do not disassemble or reassemble the charger by yourself for safety reasons.
5.When not using the charger, please remove the battery from the charger to avoid the loss of battery power.
6. Children should use this charger under the supervision of an adult;
7. Please cut off the external power supply when the charger stops charging.
8. Please ensure the battery installed is correct: make the +/- pole of the battery is a match the +/- pole of the charger.