EBL Multi-functional Balance Charger For PB LifePO4 Li-ion NiCD-LiPo NiMH
UItra fit for NiMH, NiCD LPO, Li-ion, LiFePO4, PB rechargeable batteries
【All in 0ne Box】
Comes with Octopus multi-charging wires(TRX, JST, Futaba, Tamiya, EC3, XT60, Tamiya mini, Deams(T-connector), and the power supply, all in the box for convenient charge
【Multi-function Battery Charger】
The charger has Balance charging, Fast and storage charging, Cyclic charging and discharging, Memory Storage, and load modes.
To facilitate you to choose the mode you need. This B6V2 charger has an LCD display, you can view all charging status and settings on the charger LCD screen when you browse the mode and select.
【Wide Range of Voltage】
The charger can support different battery types and voltage battery packs NICD, NIMH: 1.2v to 18v, 1S-15S LIPO, LI-ION): 3.7v to 22.xV, 1S-6S LIFEP04: 3.2v to 19.2v, 1S-6S SLA: 2v-20v
1* 80W 6A Balance Charger 1* Power adapter 1* Balanced port adapter cable 1* DC clip cable 1* Banana Plug:Tamiya mini, EC3, T-Plug, Tamiya, Futaba, Bare Lead, JST, 1* User manual
Manufacturer: EBL Dimensions: 13.5cm*9cm*3.2cm/5.31"*3.54“*1.25” Voltage: DC11.0-18.0V US adapter input: AC100-240V,50/60HZ, Adapter output: DC15V/6A Voltage: DC11-18V Maximum charging power: 80W Maximum discharge power: 10W Charging current: 0.1-6.0A Discharge current: 0.1-2.0A Current of single battery: 400ma/cell Number of NiMH/NiCd batteries: 1-15cell Number of Li-ion/polymer stages: 1-6 cells (Note: Li-Fe battery, i.e. A123, is supported) PB Battery voltage: 2-20V
The lithium-polymer battery should not exceed 1c at most, that is, 4400mah battery with a maximum of 4.4a, 2200mah battery with a maximum of 2.2a, and so on; it is recommended to be conservative with 0.5c, that is, 4400mah battery with 2.2a.