EBL Smart Battery Charger for C D AA AAA 9V Ni-MH Ni-CD Rechargeable Batteries with Discharge Function & LCD Display
⚡Smart Battery Charger⚡
1-4 AA/AAA/C/D and 1-2 9V Ni-MH/Ni-Cd rechargeable batteries, independent charging slot, can charge different size batteries freely.
MCU controlled, adopts using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
AC and DC input design (AC cable provided only), applied to worldwide voltage - AC 100-240V 50/60Hz, convenient everywhere.
Automatically stop charging when detecting improper input voltage, defective or short circuit or non-rechargeable batteries.
Constant current charging mode would protect the batteries against current fluctuation and keep using the charger safely.
Independent charging slots can charge different compatible batteries freely.
For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D, and 1/2 9V batteries.
Using Environment: Temperature: 0-40℃; Humidity:≤85%
Storage Environment: Temperature: -10-40℃; Humidity:≤60%
【Work Temperature】The surface temperature of the charger≤60℃
The surface temperature of battery≤45℃
【Reasonable Circuit Layout - Worldwide Usage 】Charging Time Table:
1pcs Battery Type (Ni-MH) Capacity Charging Time (approx)
AAA 500-1200mAh 1-3 hours
AA 1300-2800mAh 1.5-3.5 hours
C 1800-5000mAh 2-6 hours
D 1800-10000mAh 2-10 hours
9V 150-600mAh 5-20 hours
【Unique Trickle Charge 】
Adopting -∆V intellectual cut-off charging method, automatically turn to trickle charge, overheat-detection to prevent over-charging, short circuit protection, and reverse polarity protection.
【How to change the mode of Charge & Discharge 】“CHG” -- Charging;
“DISCHG” -- Discharging;
“ERROR” -- install the battery incorrectly or the battery is broken.
EBL 906 battery charger can both recharge and discharge the batteries by switch the blue button below the LCD screen.
Press this button - discharge batteries - charging mode after fully discharged
Negative delta V (- ∆V) cut-off function (except for 9V batteries), overcharge protection, short circuit protection, and non-rechargeable or bad cell detection make it easier for users.
【 What You Get 】
1 x Smart Battery Charger
1 x User manual
1 x AC power cable
Product Type: Smart Battery Charger
Dimensions: （195*93*52）±0.3 mm
Input: AC 100-240V AC 50/60Hz,10W; DC 12V 800mA
Output: AA/AAA/C/D: 1.2V DC x 4 1000mA
6F22 9V: DC 30mA
Compatible:C/D/AA/AAA/9V Rechargeable Batteries
1.Please ensure the battery installed is correct: make the +/- pole of the battery is a match for the +/- pole of the charger.
2.Never mix charge different types and different capacities of batteries under the same LED indicator.
3.Using environment: 0℃ to 40℃, it is a normal phenomenon that the battery is warmer than room temperature when charging.
4.Do not disassemble or reassemble the charger by yourself for safety reasons.